UNUSUAL GYROSCOPE
In the three-dimensional world in which as it seems to us we live, as a rule, everything revolves around one axis: yo-yo, engine rotors, mechanical gyroscopes, wheels, turbines, the impeller of a windmill, planets and solar systems, galaxies... Physicists would notice that: "the symmetry is reduced" but we try to restore the symmetry!
Is it possible to force and completely rotate a spherical ceramic rotor with magnets inside a fixed ceramic stator with electromagnets and a control system around three axes? Rotation in three-dimensional space keeps the line stationary, that is, in three-dimensional space, rotation always occurs around one axis. This is a consequence of Euler's rotation theorem. But there is nothing impossible and all problems can be circumvented, this even applies to the seemingly fundamental laws of physics, of course, if we have a "key" from the "secret door" that leads around. We’ll bypass Euler’s ban, and for this, we change the condition a little and try to rotate the rotor in a cycle (a cycle is when all the rotor points return to the old spatial coordinates and to the beginning of new cycle time).
We make these rotor rotations for short and equal periods of time, first around one axis, then another, and finally, the third, but each time in accordance with the laws of sine and/or cosine, then the oscillations of the rotor points will be complete and a cycle will occur. We will improve the device and significantly reduce friction, make the rotor levitate in a vacuum inside the stator and at the same time we will rotate it around one point, the center of mass and three axes per cycle. That's all, the symmetry is restored!
And what to do next with such three-dimensional turns? How can they be applied? Gyroscopes are amazing instruments with amazing properties. And we invented a fundamentally new type of mechanical gyroscope and this is a guarantee that our device will never get into the "museum of faulty devices ". We are beginning to study its new properties!
HOLOGRAPHIC PRINCIPLE AND ANISOTROPY OF THE UNIVERSE
So we observe that everything naturally rotates around one axis, we can confidently conclude that the symmetry of the three-dimensional world at the level of "apples" is lowered. It has been for sure perfectly established that both at the quantum level and at the cosmological level, our world is not supersymmetric in the sense of exact symmetry. On the quantum level, as in any supersymmetric model, fermions and bosons connected by a supersymmetric transformation must have the same mass, charge, and other quantum numbers (with the exception of spin). This requirement is not satisfied with particles known in nature.
Why is the reason for the decrease in symmetry not visible? A good question for the possibility of suggesting the application of the Holographic Principle to the entire Universe and finding the reason for the decrease in symmetry. The hologram of the Universe is when it seems to you that you live in a three-dimensional world, but in fact, all physics and we ourselves as information (bits) are naturally encoded, blurred and move along the entire remote spherical inflationary surface of a holographic screen consisting of two halves.
Вecause of this blurred we cannot directly observe any symmetry breaking, or rather, we can, but indirectly. Why two halves? An example of the action of the holographic principle is the anti-de Sitter space-time, which has a border located at infinite distance. To cope with problematic infinity (the boundary of the AdS space is infinitely far from its center) Physicists have turned two saddle-shaped AdS spaces into bowl-shaped dS spaces. Then they could do the obvious thing: “glue” the two bowls together along their rims describing both hemispheres, where they become connected to each other, forming a single quantum system that is holographically dual to the entire de Sitter spherical space. This design is called "dS / dS compliance".
Well, where is the symmetry breaking? The answer is obvious if we understand that we are talking about a different amount of information related to matter and its distribution on two halves of one holographic screen - the cause of symmetry breaking is the well-known Anisotropy of the Universe, which is experimentally discovered and, according to the Holographic Principle, can be projected without loss of information into two halves of one holographic screen. Actually, projection is a speculative operation, if we understand that everything lives and interacts on this holographic horizon of the Universe. We temporarily stop criticizing this formalism, because we intend to prove (more precisely falsify) the Holographic Principle in an experiment using our invention - an unusual gyroscope.
To control gravity does not require the use of exotic masses and the speed of light.
In unusual gyroscope we use inductors, but only to create coherent oscillations of the rotor and its levitation in the evacuated cavity of the stator. It is possible to produce coherent oscillations in another way, but this is the easiest way. We need only coherent oscillations of the rotor, nothing else is required. We do not need electromagnetic fields and high voltages, we only need vibrations in a vacuum. As a result of such coherent oscillations, a motionless interference picture arises from the accelerations of mass (protons, electrons) rotor. From Newton’s law, we know that a force leads to a non zero acceleration. Of course, it is well known that acceleration and temperature closely related.
Namely, as Unruh showed, an observer in an accelerated frame experiences a temperature:
kBT =ha/2пс
«In the limit of a very large region, the bonding surface can be taken to be a flat plane at infinity. In some way, the phenomena taking place in three-dimensional space can be projected onto a distant «viewing screen» with no loss of information». So, the most important assumption is that the information associated with a certain area of three-dimensional space obeys the conservation law it - the basis of the Holographic Principle. Information about the location of particles is stored in discrete bits on two halves of the spherical screen - one bit in the Planck-l² areas, but already two Planck areas contain three bits of information as additional information about the coordinates of each of the bits on the screen and are generated automatically. In other words, two bits contain exactly one bit of mutual information.
These types of information bits can accordingly be divided into the image kinetic and potential energy. Whatever information they contain, they contain it together. All information on the two halves of the spherical screen — the closed surface of region A we can be divided into numbers associated with the coordinates of the screen by number N and information represented by the temperature of the screen T. Suppose the system has full energy E. Suppose that this energy is evenly distributed between two halves of one spherical screen with a number of bits N (½kBT) as the average energy per bit, where kB is a constant Boltzmann:
E=N ½kBT,
N= A/l²,
where l² is Planck area = hG/c³
Where G is a universal gravitational constant, c is the speed of light, and h is the given Planck's constant. Then:
N=Ac³/Gh
Taking a holographic screen as the sphere of radius r, the surface area will be equal to:
A=4пr²
Now we need another well-known formula E= Mc² and make a replacement:
E=N ½kBT=N ½kBha/2пckB=haN/4пc=aпr²c³/Gпс=ac²r²/G
then:
Mc²=ac²r²/G
consider a - the acceleration of the rotor when we change the angular displacements of its mass elements around two of the three fixed axes of the Cartesian coordinates:
a=GMc²/c²r²
Add the mass of the rotor unusual gyroscope to the left and right side of the equation and get the ability to control entropic gravity without exotic masses and speeds of light:
Fentr=mа= Fgrav = GMm/r²
- Newton’s second law and gravity law
As expected, the speed of light in the equation is conquered.
The proportionality of gravitational and inertial masses was experimentally established with high accuracy.
The independence of the equation on the speed of light tells us about the possibility of artificially created forces in the selected direction on the screen without limiting the distance and speed of light to transmit and receive information creating a directed entropic force in an unusual gyroscope and measuring its remainder depending on the direction. This is equivalent to writing and reading information from the holographic screen as a grand computer memory chip, where the address is the spherical coordinates of the screen, and the data is the magnitude of the entropic force. If intelligent civilizations exist in the Universe, then they will use this particular holographic communication channel and use a non-reactive mode of movement.
REF:
"Black Holes and Entropy" Jacob D. Bekenstein http://www.cbpf.br/~cirto/MecEstNaoExten_HTML/AULAS/Aula_12/Bekenstein_(Black_Holes_And_Entropy)_[PRD_1973].pdf
Phys. Rev. Lett. 100, 041101 (2008): Test of the Equivalence Principle Using a Rotating Torsion Balance
https://arxiv.org/abs/0712.0607 Test of the Equivalence Principle Using a Rotating Torsion Balance
On the Origin of Gravity and the Laws of Newton Erik Verlinde https://arxiv.org/pdf/1001.0785.pdf
L. Susskind, «The World as a Hologram». J. Math. Phys. 36 (1995) 6377, arXiv:hep-th/9409089.
https://www.facebook.com/groups/Unusualgyro/
www.isan.com.ua